The IceCap RO/DI water filtration system is a four-stage reverse osmosis de-ionization filter system that efficiently removes up to 99% of tap water impurities. IceCap RO/DI system does not require a power source and can be installed within minutes to create the perfect water for your freshwater aquarium, saltwater, as well as reef aquariums.

4 Stage Value RO/DI Features:

RO/DI single-membrane system with durable clear filter canisters
Glycerin-filled pressure gauge
Single Dow Filmtec membrane (The best there is.)
5 µ IceCap polypropylene sediment pre-filter
5 µ IceCap carbon block filter
Refillable DI cartridge with high-capacity color changing resin
All-in-one universal filter wrench to tighten and loosen canisters
Installation connection fittings, polyethylene tubing & accessories
Does not require a power source to run
1yr Warranty (Warranty does not include filters)

Applied Pressure Psi Gallons per Day % Stable Rejection Rate
60 100 95

Stage 4 – DI Media
DI filter is the last stage of water filtration for the Smart RODI reverse osmosis systems and is necessary to reduce Total Dissolved Solids (TDS) to zero.

The IceCap Booster Pump will increase the amount of pressure to your reverse osmosis membrane to achieve greater efficiency and performance. Compatible with all IceCap four-stage RO/DI Models: IC-RI75, IC-RI100, IC-RI150, IC-RI200, and most other brand reverse osmosis systems. This all-in-one kit contains everything you need to safely install and operate the booster pump on any exiting reverse osmosis system.
WARNING: High water pressure can cause leaks and damage to the surrounding building or fixtures if not properly installed on a RO/DI system capable of handling added pressure. Users must check all fittings for tightness. IceCap/CoralVue assumes no responsibility for water damage due to leaks or improper installation of the unit.

Minimum Water Feed Pressure for Optimal Results: 20PSI

Benefits of Increased Water Pressure

Improves Waste to Product Water Ratio
Faster Water Production
Reduces DI Resin Consumption

Booster Pump Kit Includes

1. Booster Pump – Performance enhancing
2. Low-Pressure Switch – Prevents the pump from running dry and burning up
3. High-Pressure Switch – Shuts the pump down when pressure is added
4. 24v/2A Power Supply with Wire Harness – Screws sold separately
5. 3ft of 1/4in Tubing – Use to and from the booster pump to the RO/DI system

WARRANTY

CoralVue, Inc. and IceCap hereby guarantee this product to be free from defects in material and workmanship for a period of:

1 Year

Warranty is activated on the date of purchase.

This Standard Limited Warranty applies and is limited as follows:

To the product only as long as it remains in the possession of the original purchaser.
To the product that has not been subject to accident, misuse or abuse.
To the product that has not been modified, altered, defaced, or had repairs made or attempted by other than CoralVue, Inc.
That CoralVue be immediately notified in writing within ten (10) days of first knowledge of defect by owner or his agent.
That CoralVue, Inc. shall be given first opportunity to make any repairs, replacements or corrections to the defective construction within a reasonable period of time.
Under no circumstances shall CoralVue and/or the Manufacturer be liable by virtue of this warranty or otherwise for damage to any person or property whatsoever for any special, indirect, secondary or consequential damages of any nature however arising out of the use or inability to use because of the product defect.